Tutorials

Create a terrain | 3:00 min
Applicable plans Lake Valley Mountain Peak   Learn how you can create a virtual environment from your UAV orthophotos and elevation models a...
Thu, 17 Aug, 2017 at 5:23 PM
Calculate Volumes | 3:00 min
Applicable plans Lake Valley Mountain Peak   Learn how you can use your UAV data to calculate volumes, set reference levels or polygons and make ...
Thu, 17 Aug, 2017 at 5:24 PM
Guided breakline drawing | 3:05 min
Applicable plans Lake Valley Mountain Peak   Learn how you can create breaklines very fast with the guided breakline drawing function. ...
Thu, 17 Aug, 2017 at 5:24 PM
Modify Terrain with a Triangulation | 2:10 min
Applicable plans Lake Valley Mountain Peak   Learn how you can level your terrain to the triangulation you have create from your virtual s...
Thu, 17 Aug, 2017 at 5:24 PM
Simulate the Future | 2:55 min
Applicable plans Lake Valley Mountain Peak   Learn how you can use 3D models to simulate the future and analyze the impact of planned civil work...
Thu, 17 Aug, 2017 at 5:24 PM
Remove a conveyor | 1:50 min
Applicable plans Lake Valley Mountain Peak   Learn how you can easily remove a conveyor with the Draped Polygon reference level. Roughly dr...
Thu, 17 Aug, 2017 at 5:25 PM
Terrain Operations with Breaklines | 2:55 min
Applicable plans Lake Valley Mountain Peak   Learn how you can modify a terrain or calculate a volume by applying a breakline. ...
Thu, 17 Aug, 2017 at 5:25 PM
Navigating Around | 2:40 min
Applicable plans Lake Ridge Mountain Peak   Learn how you can easily navigate around your virtual site with the Virtual Surveyor desktop ap...
Thu, 17 Aug, 2017 at 5:25 PM
Road Surveying – Part 1: Create Topography
Applicable plans Lake Valley Mountain Peak   Learn how to create a clean topographic survey of a road by tracing banks and ditches for furth...
Thu, 17 Aug, 2017 at 5:25 PM
Road Surveying – Part 2: Capture Features
Applicable plans Lake Valley Mountain Peak   Learn how to capture topographic features on a clean surface of a road.
Thu, 17 Aug, 2017 at 5:26 PM