When a Stockpile is selected, the SELECTION - TOOLS menu becomes available. The TOOLS menu contains tools that allow you to annotate or perform advanced functions on the selected Stockpile(s). The menu dynamically adjusts when a stockpile can be recalculated or if you have an opportunity to extract a surface from a stockpile. 

Tools tab menu options on a selected stockpile that was created from a boundary or a surface.

Tools tab menu options on a selected stockpile that was created by calculated between Timesteps.

Overview

• Annotate Group
• Create Group
• Volumes Group
• Stockpile Group

Annotate Group

Icon	Name	Description
-	Name	Displays the Stockpile's Descriptor & Number over the Stockpile in the Viewport.
-	Volume	Displays the calculated volume amount over the Stockpile in the Viewport. Volume is displayed in cubic meters or cubic yards, depending on the Project Settings.
-	2D Area	Displays the area of the projected ground surface of the Stockpile, in the Viewport. The Area is displayed in square meters or square yards, depending on the Project Settings.
-	Material	Displays the material type over the Stockpile. The Material that is assigned to the stockpile will appear based on the material type that was entered in the Material Editor.
-	Tonnage	Displays the stockpile's total calculated weight per ton. The Tonnage measurement is displayed in either metric tons per cubic meters or imperial tons per cubic yards, depending on the Project Settings.
-	Value	Displays the calculated net value of the stockpile based on the assigned material type. Value is displayed in whatever monetary system you have entered in the Material Editor.
	Label	Allows you to change the Stockpile Label color.
	Size	Allows you to change the Stockpile Label size.

Create Group

Icon	Name	Description
	Extract Boundary	Creates a Boundary from the outside edge of your Stockpile. Result: Boundary
	Extract Surface	Extracts and creates a Surface from your Stockpile. The extracted Surface is a copy of the surface being used to measure your volume. Extract Surface only appears when you calculate a volume from a surface, this tool will not appear if the stockpile is calculated between Timesteps. Result: Surface

Volumes Group

Icon	Name	Description
	Recalculate Volume	Allows you to recalculate the volume of your Cut/Fill. This tool is only available if there are any changes made to the stockpile that effect its Cut/Fill calculation. E.g. compare the stockpile to another Timestep, or any modified terrain within the boundary of the stockpile.

Stockpile Group

Icon	Name	Description
-	Material	Contains a dropdown menu of available materials you can assign to a stockpile. Material options consist of created materials from your Material Editor. The search function can be utilized to help quickly find materials.
	Material Editor	Enables the Material Editor workspace. Used for defining stockpiles.
-	Compare To	Compares the stockpile to the state it was in from another Timestep on the Timeline.